EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
EPEVER Photo voltaic Demand CONTROLLER Set up: TRACER AN Collection CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Charge Controller is really a highly economical solar controller suitable for off-grid solar techniques. According to multiphase synchronous rectification technological know-how, it assures optimized energy conversion and technique steadiness for an array of photovoltaic (PV) apps.
Vital Options from the EPEVER Tracer AN Collection Controller
The Tracer AN series makes use of EPEVER Photo voltaic Charge Controller know-how for exceptional solar Electrical power harvesting. Important capabilities include:
Multiphase Synchronous Rectification (MSR) for improved Electricity conversion.
Sophisticated MPPT Algorithm with >99% performance.
Twin-Phase Charging for Increased battery life.
Liquid crystal display Display with true-time details monitoring.
Several Load Command Modes which include handbook and timer.
Detailed Digital Protections against overcharging, more than-discharging, limited circuits, and reverse polarity.
Stage-by-Action Guide to Starting the EPEVER Tracer AN Series Controller
1. Unboxing and Preparing the Controller
Make sure all elements are provided: Tracer AN device, temperature sensor, conversation cables, and consumer guide.
Confirm the model amount and voltage rankings match your solar panel and battery specs.
two. Mounting the Cost Controller
Pick out a perfectly-ventilated, dry site close to the battery bank.
Protected the Tracer AN controller utilizing the furnished mounting brackets.
Sustain appropriate clearance for heat dissipation.
three. Wiring the Photo voltaic Cost Controller
Caution: Often comply with appropriate basic safety protocols and ensure the procedure is driven off just before connecting elements.
Stage 1: Join the battery terminals into the cost controller (positive to favourable, destructive to damaging).
Move two: Connect the photo voltaic panel array on the PV visit here input terminals.
Move three: Link the load terminals if employing a direct load connection.
Move four: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Settings
Ability to the controller by connecting the battery 1st.
Use the Liquid crystal display Exhibit to navigate the settings menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Management Modes: Manual, timer, gentle Command.
five. Monitoring and Facts Logging
The Tracer AN Series supports serious-time monitoring using the MT50 remote meter.
Information can be logged by means of the RS485 communication port applying program including Photo voltaic Station Personal computer.
Distant monitoring is achievable with the EPEVER WiFi module.
6. Troubleshooting Common Troubles
Problem 1: No Electric power Output
Examine battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Issue two: About-Voltage Security
Confirm the photo voltaic array’s voltage ranking.
Alter system parameters if needed.
Issue 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings inside the menu.
Great things about the Tracer AN Collection with MSR Technologies
The multiphase synchronous rectification know-how ensures:
Larger Performance: Decreased Strength losses all through conversion.
Enhanced Dependability: Steady general performance under variable loads.
More time Battery Everyday living: Consistent and correct charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological know-how is surely an Remarkable option for optimizing solar energy era and lengthening battery daily life. By pursuing the above mentioned set up information, consumers can be certain most effectiveness and method longevity.